Packaging & Delivery
Packaging Details
Paking Size (m) :0.3*0.16*4=0.192 cbm
Each tube is 4 meters long ,inner is wrapped separately with plastic bag,
Pipe fittings are packed in cartons.size:0.9*0.45*0.3=0.122cbm,clear plastic bag + carton outside package on pallets + wrapping film
Delivery Time
5-20days after deposit confirmed
Because of the existence of the steel mesh skeleton in the steel mesh reinforced PE pipe,
The product properties of withstanding loop pressure and the ESCR are increased a lot. According to the IOS13477(test S4),the BECETEL(Belgian Research Centre for Pipe&Fittings) had evaluated the performance of the resistance to rapid crack propagation of the product,and the results show that the RCP resistance of the steel mes reinforced PE pipe is excellent,and much higher than that of PE pipe.
Name | Inner pressure(Mpa) | Crack length(mm) | Outer diameter(mm) |
Steel Framed HDPE Pipes | 1.0 | 未开裂 | 174 |
PE 80 SDR11 | 0.71 | 90 | 110 |
PE 100 SDR11 | 0.89 | 95 | 110 |
The elasticity modulus of the steel is about 200 times,higher than that of the PE pipe.Reinforced by the steel mess skeleton,the rigidity and the property of resistance to impact and the dimension stability of the product are far beyond than any kind of plastic pipes.At the same time,the characters of the steel mesh skeleton configuration make the product preserve reasonable flexibility in the axial direction,so the pipes posses both rigidity and flexibility,and it can be transported and installed easily, in addition to that,the pipelines can resist to vertical load created by soil movement or traffic,and it also has excellent characters both for economy and safety when operation of the line.
Because of steel mesh inside of the pipe,the steel mesh reinforced PE pipe possesses the good traceability.No additional tracing and protecting mark to be needed.The pipe can be detected by magnetic detectors easily.thus it is very convenient for the pipeline to be repaired or maintained.
Specification>>>
| Dia | wall thickness | steel reinforced HDPE pipe for industry | steel reinforced HDPE pipe for water | ||||||||||
| nominal pressure | TEMP | nominal pressure | TEMP | ||||||||||
| DN50 | 11 | 1.0 | 1.6 | 2.0 | 2.5 | 1.0 | degree | 1.0 | 1.6 | 2.0 | 2.5 | 1.0 | degree |
| DN65 | 11 | √ | —20-70 | √ | —20-80 | ||||||||
| DN80 | 12 | √ | √ | ||||||||||
| DN100 | 12 | √ | √ | √ | √ | ||||||||
| DN125 | 12 | √ | √ | √ | √ | ||||||||
| DN150 | 12 | √ | √ | √ | √ | √ | √ | √ | √ | √ | |||
| DN200 | 12.5 | √ | √ | √ | √ | √ | √ | √ | |||||
| DN250 | 12.5 | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| DN300 | 12.5 | √ | √ | √ | √ | √ | √ | ||||||
| DN400 | 15 | √ | √ | √ | √ | √ | √ | ||||||
| DN350 | 15 | √ | √ | √ | √ | √ | √ | ||||||
| DN400 | 15 | √ | √ | √ | √ | √ | √ | ||||||
| DN450 | 16 | √ | √ | √ | √ | √ | √ | ||||||
| DN500 | 16 | √ | √ | √ | √ | √ | √ | ||||||
| DN600 | 20 | √ | √ | √ | √ | ||||||||
Correction factor for nominal pressure at different temperature
| steel reinforced HDPE pipe for water | TEMP℃ | 0<t≤20 | 20<t≤30 | 30<t≤40 | 40<t≤50 | 50<t≤60 | 60<t≤70 | 70<t≤80 |
| correction factor | 1 | 0.95 | 0.9 | 0.86 | 0.81 | 0.76 | 0.6 | |
| steel reinforced HDPE pipe for water | TEMP℃ | 0<t≤20 | 20<t≤30 | 30<t≤40 | 40<t≤50 | 50<t≤60 | 60<t≤70 | |
| correction factor | 1 | 0.95 | 0.9 | 0.86 | 0.81 | 0.76 |
Maximum Bending Radius
| Nominal inner dia(d.mm) | 50 | 65 | 80 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 |
| MAX.bending radius(r.mm) | 80D | 80D | 80D | 80D | 80D | 100D | 100D | 100D | 110D | 110D | 110D | 110D | 110D |
Distance Between Brackets
| spec(mm) | 50,65 | 800,100 | 125,150 | 200,250 | 300,350,400,450,500 | 600 |
| support space(M) | 2.5 | 3 | 3.5 | 4 | 5 | 6 |
Thermal Conductivity of the Pipe
| Name | (W/MK) |
| steel reinforced HDPE pipe | 0.43 |
| steel pipe | 50-60.5 |
Certifications>>>
FAQ>>>
Q1. Are you trading company or manufacturer ?
A: We are professional manufacturer and welcome to your visit at any time.
Q2. How long is your delivery time?
A: Generally it takes 3-7 days if the goods are in stock,which is depends on your quantity and can be negotiable.
Q3. Do you provide samples ?
A: Yes,of course sample is avaliable and for small quantity we can supply for free.
Q4.What is your terms of payment ?
A: L/C,Western Union,T/T30% in advance ,balance before shippment and so on.
Q5.Can I have my own Logo on the product?
A: Yes, sure,you just send us your drawing,we'll make logo for you and before production we will confirm with you in advance.
Q6.Can I request to change the method of packaging and transportation?
A: Yes, the packaging and transportation can be made as per your requirements.
